Signature's DuraPad is the lightest and most durable outrigger pad on the market today. DuraPad was designed originally by an actual lineman who was tired of using outrigger pads that didn't work or were hard to handle. DuraPad, unlike other outrigger pads – which are prone to decay after prolonged exposure and are difficult to handle – were engineered using aerial device manufacturer's standards. The result: a long lasting and easy-to-handle outrigger pad.
DuraPad Outrigger Pads are manufactured from an industrial-grade plastic composite that is impervious to exposure which means that our outrigger pad can withstand the rigors of prolonged use without deterioration, decay or decomposing. These jack pads will not absorb chemicals, oil or moisture.
DuraPad are a lighter weight than other pads on the market (a 22" x 22" pad weighs only 15 lbs). Designed to flex without cracking or breaking, DuraPad will conform to the contours of the terrain. Once they are off the ground and not being used, they will return to their original shape.
DuraPad Outrigger Pads come with a limited lifetime warranty and are made in the USA.
Signature's uniquely-designed outrigger pads are designed with a multi-directional anti-slip texture to provide traction especially when covered with snow or water. The pad cleverly will raise up when the pad is being pressed into sloppy ground – so you don't have to "get in the mud" to pick them up. Plus it's a simple matter to hose them off to restore them to like-new condition. It's squared-off corners maximized surface area and it's rounded edges allow for easier handling.
DuraPad's handles are superior to all the other pads on the market. Made of aircraft-grade steel and bolted to the pad, these 3/16" galvanized wire rope handles are durable and long-lasting. These specially-designed handles are bolted in position – to keep them clear of the outrigger foot. (Standard rope handles have a tendency to fall under the pad which makes them prone to tearing.)
DuraPad is available in several sizes (see below). Custom sizes are also available with no minimum order. Custom logos can be molded onto DuraPad with a minimum order. Please inquire
|12" x 12" x 1"||.30m x .30m x .02m||6 lbs.|
|14" x 14" x 1"||.36m x .36m x .02m||8 lbs.|
|18" x 18" x 1"||.45m x .45m x .02m||13 lbs.|
|22" x 22" x 1"||.56m x .56m x .02m||19 lbs.|
|22" x 24" x 1"||.56m x .60m x. 02m||21 lbs.|
|24" x 24" x 1"||.60m x .60m x .02m||22 lbs.|
|30" x 30" x 1"||.76m x .76m x .02m||34 lbs.|
|36" x 36" x 1"||.91m x .91m x .02m||50 lbs.|
|18" x 18" x 2"||.45m x .45m x .05m||23 lbs.|
|24" x 24" x 2"||.60m x .60m x .05m||41 lbs.|
|30" x 30" x 2"||.76m x .76m x .05m||64 lbs.|
|36" x 36" x 2"||.91m x .91m x .05m||92 lbs.|
|48" x 48" x 2"||1.2m x 1.2m x .05m||163 lbs.|
The DuraPad Pole Puller Pad is a product that was born out of experience. Developed by a lineman with 20 years of field experience – this is pole puller pad has all of the features that were missing: rugged, durable, lightweight and easy to handle.
The biggest problem facing the lineman is the jack butt sinking into the ground, especially if the ground condition is soft or sandy – which leads to poorly devised methods that can cause injury to personnel and damage to equipment. The Signature DuraPad pole puller pad eliminates potential harm and damage and makes the job a lot easier.
DuraPad is made to last – manufactured with aerial device standard, including aircraft-grade wire rope handles. The shape of the pad is designed to fit around the pole and the surface provides traction to prevent slipping when wet. No other pole puller pad on the market has an anti-slip surface.
DuraPad Pole Puller Pad is 19" x 24" x 2" and is available in Black and Safety Yellow. Other thicknesses and custom colors available – please inquire. DuraPad Pole Puller Pads come with a limited lifetime warranty and are made in the USA.
|19" x 24" x 1"||.48m x .48m x .02m||15 lbs.|